How enter BIOS when ultra fast boot is enabled?

How enter BIOS when ultra fast boot is enabled?

If you have Fast Boot enabled and want to enter BIOS setup. Hold down the F2 key, then power on. That will take you to the BIOS setup utility. You can disable the fast boot option here.

How do I access Asrock’s Super Fast Boot BIOS?

Hold Shift and click restart. When the recovery screen appears, go through the menus, I think there are more options and find the UEFI firmware settings, click on that and it will boot into the BIOS.

What is the ultra-fast boot BIOS?

Gigabyte’s ultra-fast boot feature bypasses the POST screen from where you can normally press DELETE to go to BIOS. This way, the computer grows faster, but you won’t be able to access the BIOS when it starts up. You will have to reboot into UEFI firmware settings from Windows.

Should fast boot be enabled in BIOS?

If you have dual boot, it’s best not to use fast startup or hibernation at all. Depending on your system, you may not be able to access BIOS / UEFI settings when you shut down a computer with Quick Start enabled. … Some BIOS / UEFI versions work with a system in hibernation and others do not.

How do I boot into BIOS without rebooting?

However, since the BIOS is a pre-boot environment, you cannot access it directly from Windows. On some older computers (or those deliberately configured to boot slowly), you can press a function key like F1 or F2 at power up to enter BIOS.

How do I boot into BIOS?

To access your BIOS, you will need to press a key during the boot process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press to enter the configuration ”, or something similar. Common keys that you may need to press include Delete, F1, F2, and Escape.

Should I turn on ultra-fast boot?

Quick start, saves a couple of seconds during post-hardware verificationas it stores a snapshot of the current configuration. If you don’t change hardware or multiboot, use it unless it causes problems.

How do I change my BIOS to UEFI?


  1. Open the command prompt with administrator privileges.
  2. Run the following command: mbr2gpt.exe / convert / allowfullOS.
  3. Shut down and boot into your BIOS.
  4. Change your settings to UEFI mode.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and the platform firmware. … UEFI can support remote diagnostics and repair of computers, even without an operating system installed.

How do I use the ultra-fast boot?

That’s how:

  1. Boot into UEFI firmware settings.
  2. Click on the Boot icon and click on the Quick Boot settings. (…
  3. Select the Disabled (normal), Fast, or Ultra Fast option you want for Fast Boot. (

How do I boot into Gigabyte BIOS?

When starting the PC, press “Del” to enter BIOS setup and then press F8 to enter dual BIOS setup.

How do I reset my BIOS settings?

How to reset BIOS settings on Windows PC

  1. Navigate to the Settings tab under your Start menu by clicking on the gear icon.
  2. Click on the Update & Security option and select Recovery on the left sidebar.
  3. You should see a Restart now option under the Advanced Settings heading, click here when you’re ready.

Should I disable the fast boot BIOS?

Leaving fast startup enabled shouldn’t harm anything on your PC, it’s a built-in Windows feature, but there are a few reasons why you might want to disable it. One of the main reasons is if using Wake-on-LAN, which will likely have problems when your PC shuts down with fast startup enabled.

What should my BIOS boot order be?

A typical method to access the BIOS setup screen is press ESC, F1, F2, F8, F10 or Del during the boot sequence. … The first device in the order list has the first boot priority. For example, to boot from a CD-ROM drive instead of a hard disk, put the CD-ROM drive in front of it on the priority list.

What is UEFI fast boot?

The Fast Boot feature for UEFI motherboards has a Fast and Ultra Fast option that allows your PC to start up much faster than normal.


Conclusion paragraph: Let me know in the comments what you think about this blog post. about How enter BIOS when ultra fast boot is enabled?. Did you find it helpful? What questions do you still have? I’d love to hear your thoughts!
#enter #BIOS #ultra #fast #boot #enabled

Similar Posts

Leave a Reply

Your email address will not be published.