You asked: How do I get my external CD drive to work on Windows 10?

You asked: How do I get my external CD drive to work on Windows 10?

How do I use an external DVD drive in Windows 10?

How do I use an external DVD drive in Windows 10?

  1. Press Windows key + R to open the run command.
  2. Type devmgmt. msc and hit enter to open device manager.
  3. Expand the DVD / CD-Rom drives and check if the external DVD drive is listed.
  4. If so, right click on it and uninstall it.
  5. Restart the computer.

How do I make my external CD drive work?

Insert one end of the USB cable into the external connector. CD drive. Connect the other end of the cable to your computer’s USB port. Allow the computer to install the drivers for your external CD drive. Usually the computer will recognize the external drive and automatically install the device drivers.

Why is my CD drive not detected?

Corruption on windows

If the CD-ROM works in safe mode but not in normal Windows, the problem is caused by a running program or the drivers are corrupted. Open Device Manager, highlight and remove the CD-ROM by pressing the Delete key. … Windows should then detect the CD-ROM and reinstall it.

Do external DVD drives work with Windows 10?

Easy Installation – Fortunately, most external CD / DVD drives are compatible with Windows 10 no additional driver download and installation required. Just plug it directly into your Windows computer, it will install automatically in seconds and you can see this external device.

How do I get Windows 10 to recognize my DVD drive?

Boot to the Windows 10 desktop, then start Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD / CD-ROM drives, right-click the listed optical drive, and then click Uninstall. Exit Device Manager and then restart your computer. Windows 10 will detect the drive and then reinstall it.

Why can’t I play DVD in Windows 10?

Microsoft has removed built-in support for DVD video playback in Windows 10. Therefore, DVD playback is more troublesome in Windows 10 than in previous versions. … So we recommend that you use VLC player, a free third-party player with built-in DVD support. Open VLC media player, click Media and select Open Disc.

How do I know if my CD drive is working?

How can I tell if my CD drive is working?

  1. Check operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
  2. Check the unit. Click “Start” on the task bar. Click “Computer” on the right side of the Start menu. …
  3. Check Device Manager. Click “Start” on the task bar. Click on “Control Panel”.

How do I play a CD on my laptop without a CD drive?

In this guide, we will give you the facts on how to play a DVD or CD on a desktop or laptop PC without a disc drive.

These tips work for desktop PCs too.

  1. Use an external DVD drive. Buy HP external drives now. …
  2. Create ISO files for virtual disks. …
  3. Extract files from CD, DVD or Blu-ray. …
  4. Share CD and DVD drives over the Windows network.

When I put a CD in my computer, nothing happens Windows 10?

This probably occurs because Windows 10 disables autoplay by default. Hold down the Windows + R keys to open the Run window. … Select Browse and navigate to the TurboTax CD in your CD / DVD / RW drive (usually your D drive).

How do I enable my CD drive?

How to enable DMA settings of a hard disk drive, CD-ROM, CD-R / RW, and DVD-ROM drive?

  1. Launch Control Panel.
  2. Double click on System.
  3. Click on the Device Manager tab.
  4. For hard drive, click to expand Disk drive. …
  5. Right-click the required drive and click Properties.
  6. Click on the Settings tab.
  7. Select the DMA option.

How can I fix my CD drive that won’t read?

HP pcs: CD / DVD drive cannot read discs (Windows 10, 8)

  1. Step 1: Confirm if the disk is causing the problem. …
  2. Step 2: Run the Hardware and Devices troubleshooter. …
  3. Step 3: Test the drive for a hardware failure. …
  4. Step 4: Check the status of the drive in Device Manager. …
  5. Step 5: enable autoplay. …
  6. Step 6: restore the PC to a previous state.

How do I connect my CD drive to my computer?

How to install a CD / DVD drive in a PC

  1. Turn off the PC completely. …
  2. Open the computer to install the CD or DVD drive. …
  3. Remove the slot cover from the drive. …
  4. Configure the IDE operating mode. …
  5. Place the CD / DVD drive in the computer. …
  6. Connect the internal audio cable. …
  7. Connect the CD / DVD drive to the computer with an IDE cable.

What is the best external DVD drive?

Best External DVD Drives

  • LG 8X Multi Ultra Slim GP65NB60. USB 2.0 connectivity. DVD support. DVD / CD. …
  • USB 2.0 selection. Asus ZenDrive. USB 2.0 connectivity. DVD support. …
  • Blu-Ray selection. Pioneer BDR-XD05B. USB 3.0 connectivity. DVD support. …
  • Dell selection. Dell DW316. USB 2.0 connectivity. …
  • MAC Pick. Apple USB SuperDrive. USB 2.0 connectivity.

How do I install CD drivers in Windows 10?

Open the file to start the installation.

  1. Insert the disc into your PC and then follow the instructions on your screen. You may be asked for an administrator password.
  2. If the installation does not start automatically, check the AutoPlay settings. …
  3. You can also choose autoplay defaults for removable drives and memory cards.

Can’t find DVD CD ROM drives in Device Manager?

Try this – Control Panel – Device Manager – CD / DVD – Dual click the device – Driver tab – click Update Drivers (this will probably do nothing) – then RIGHT CLICK on the drive – UNINSTALL – REBOOT This will update the default driver stack. Even if the drive is not shown, continue below.


Let me know in the comments what you think about this blog post. about You asked: How do I get my external CD drive to work on Windows 10?. Did you find it helpful? What questions do you still have? I’d love to hear your thoughts!
#asked #external #drive #work #Windows

Similar Posts

Leave a Reply

Your email address will not be published.